Arris C4C - Display All Channel Set Configuration Values

Chapter 14: Cable-side Configuration
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 421
Cable
-mac chSetId DS/US Channel Set
----- ---------- ----- -----------------------------------------------
1 0x01000001 DS 10/0 10/1 10/2 10/3
1 0x01000001 US 2/4 2/5 2/6 2/7
5 0x01000001 DS 9/0 9/1 9/2 9/3
5 0x01000001 US 2/8 2/9 2/10 2/11
Display All Channel Set Configuration Values
The following command example displays all configuration values, including single channel sets:
show cable channel-sets full
An output similar to the following example will occur:
cable
-mac chSetId DS/US Channel Set
----- ---------- ----- ------------------------
1 0x00000002 DS 13/1
1 0x00000003 DS 12/2
1 0x00000004 DS 12/3
1 0x00000005 DS 12/4
1 0x00000006 DS 12/5
1 0x00000007 DS 12/6
1 0x00000008 DS 12/7
1 0x00000009 DS 12/8
1 0x0000000a DS 12/9
1 0x0000000b DS 12/10
1 0x0000000c DS 12/11
1 0x0000000d DS 12/12
1 0x0000000e DS 12/13
1 0x0000000f DS 12/14
1 0x00000010 DS 12/15
1 0x00000100 DS 12/0 12/1 12/2 12/3
1 0x00000101 DS 12/4 12/5 12/6 12/7
1 0x00000102 DS 12/8 12/9 12/10 12/11
.
.
.
6 0x00000101 US 3/4 3/5 3/6 3/7
6 0x01000001 US 3/8 3/9 3/10 3/11
6 0x01000002 US 3/0 3/1 3/2 3/3
6 0x01000003 US 3/4 3/5 3/6 3/7