Arris C4C - Configure Router Bgp Neighbor Allowas-In

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2403
configure router bgp * neighbor * allowas-in
Purpose
Accepts the as-path as the AS present in it.
Default Access Level
10
Command Syntax
configure router bgp [<int>] neighbor <ipv6> allowas-is <0-10>
configure router bgp [<int>] neighbor <ipv6> allowas-is <0-10> no
Supplemental
Information
To remove an entry, use the no command.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535.
<ipv6>
IPv6 address.
[advertisement-
interval <sec>]
Value in seconds. Minimum interval between routing updates. Valid range is 0-600 seconds.
[<0-10>]
Number of occurrences of AS number.