Arris C4C - Configure Router Isis Net

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2465
configure router isis net
Purpose
Configures an IS-IS network entity title (NET). NETs define the area addresses for the IS-IS area and the system ID of the router.
Default Access Level
15
Command Syntax
configure router isis net <addr>
configure router isis net <addr> no
Supplemental
Information
Typically, the address is in a form of 49.XXXX.NNNN.NNNN.NNNN.00
Where: 49.XXXX (3 bytes is the area address,
NNNN.NNNN.NNNN (6 bytes) is the system id, and
.00 (last byte) is the n-selector.
To remove the NET, use the no option.
Parameters
<addr>
The host NSAP address