Chapter 28: PacketCable™ Services and Voice Applications
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 828
Showing PacketCable Timers
To display all of the PacketCable timer settings, enter:
show packetcable global
Look for timer settings in the following output to obtain needed timer information:
PacketCable DQoS
Administrative state: UP
COPS TCP port: 2126
Timer t0: 30 seconds
Timer t1: 250 seconds
Optional subscriber ID in gate messages: disabled
PacketCable Multimedia
Administrative state: UP
COPS TCP port: 3918
Timer t1: 300 deciseconds
Version: I05(COPS version 4.0)
Remotely connected SubscriberID VRF: default
Gate Message Throttling:
SCMNORMAL max Gate Messages per 10 seconds: 900
SCMYELLOW max Gate Messages per 10 seconds: 900
SCM RED max Gate Messages per 10 seconds: 300
Admission Control Limits:
Upstream Downstream
Priority Reserved Allowed Reserved Allowed
-------- ------- -------- -------
Norm Voice 0% 50% 0% 50%
Emrg Voice 0% 70% 0% 70%
Total 70% 70%
Preemption: enabled
IP Multicast -
Mcast CAC: disabled
Event Messaging Parameters
Enabled: no - cadEvMsgEnableFlag disabled
Element ID: 12345
Event messaging UDP source port: 1813
Maximum number of events per batched message: 10
Batch timer: 1 minute
To Next Page
Loading...
