Arris C4C - Configure Key Chain Key Accept-Lifetime

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2161
configure key chain * key * accept-lifetime
Purpose
Defines a specific accept lifetime for the key.
Default Access Level
15
Command Syntax
configure key chain <key chain name> key <0-255> accept-lifetime <start time yyyy:mm:dd:hh:mm:ss> <end
time yyyy:mm:dd:hh:mm:ss | duration <seconds> | infinite>
configure key chain <key chain name> key <0-255> accept-lifetime <start time yyyy:mm:dd:hh:mm:ss> <end
time yyyy:mm:dd:hh:mm:ss | duration <seconds> | infinite> no
Supplemental
Information
To set the accept lifetime to be infinite, enter the no option.
Parameters
<key chain name>
A text string up to 16 characters long.
<0-255>
Sequence number assigned to this key.
<start time
yyyy:mm:dd:hh:mm:s
s>
Start time is in the form of year=yyyy, month=mm, day=dd, hour=hh, minute=mm, second=ss
<end time
yyyy:mm:dd:hh:mm:s
s>
End time is in the form of year=yyyy, month=mm, day=dd, hour=hh, minute=mm, second=ss
<seconds>
Time in seconds that the key is valid to be received