Arris C4C - Configure Route-Map Deny Match Ipv6 Next-Hop Prefix-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2260
configure route-map * deny * match ipv6 next-hop prefix-list
Purpose
Configure conditions that deny routes that match the next-hop address of route.
Default Access Level
15
Command Syntax
configure route-map <word> deny [<int>] match ipv6 next-hop prefix-list <word>
configure route-map <word> deny [<int>] match ipv6 next-hop [prefix-list <word>] no
Supplemental
Information
To disable this function, use the no option.
Parameters
<word>
Name of this route-map
[<int>]
Next-hop or sequence number of the route.
<word>
Prefix-list name