Arris C4C - Configure Interface Cable-Mac;Ip Igmp Backup-Proxy-Interface

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1596
configure interface cable-mac * ip igmp backup-proxy-interface
Purpose
Sets the backup IGMP proxy interface for the specified interface.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac[.s]> ip igmp backup-proxy-interface <gigabitethernet <17-18>/<0-
9>[0.254]> | link-aggregate <0-9[0.254]> | tengigabitethernet <17-18>/<10>[0.254]>
configure interface cable-mac <mac[.s]> ip igmp backup-proxy-interface <gigabitethernet <17-18>/<0-
9>[0.254]> | link-aggregate <0-9[0.254]> | tengigabitethernet <17-18>/<10>[0.254]> no
Supplemental
Information
N/A
Parameters
<mac[.s]>
The MAC identifier and optional sub interface.
gigabitethernet <17-
18>/<0-9>[0.254]>
Configures the gigabitethernet as backup-proxy-interface.
link-aggregate <0-
9[0.254]>
Configures link-aggregate as backup-proxy-interface.
tengigabitethernet
<17-18>/
<10>[0.254]>
Configures the tengigabitethernet as backup-proxy-interface.