Arris C4C - Configure Interface Tengigabitethernet Ip Igmp Backup-Proxy-Interface

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2063
configure interface tengigabitethernet * ip igmp backup-proxy-interface
Purpose
Sets the IGMP backup proxy interface for the specified interface.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot/port> ip igmp backup-proxy-interface <gigabitethernet <17-
18>/<09>[.<0-254>]> | link-aggregate <0-9[.0-254]> | tengigabitethernet <17-18>/<10>[.<0-254>]>
configure interface tengigabitethernet <slot/port> ip igmp backup-proxy-interface <gigabitethernet <17-
18>/<09>[.<0-254>]> | link-aggregate <0-9[.0-254]> | tengigabitethernet <17-18>/<10>[.<0-254>] no
Supplemental
Information
To disable the IGMP backup proxy on the interface, use the no option.
Parameters
<slot>/port>
RCM slot number/tengigabitEthernet port number.
Valid range for the C4 CMTS is <17-18>/<10>
Valid range for the C4c CMTS is <17>/<10>
gigabitethernet <17-
18>/<0-9>[.<0-254>]
Configures the gigabitethernet as the backup proxy interface
link-aggregate <0-
9[.0-254]>
Configures the link-aggregate as the back-up proxy interface
tengigabitethernet
<17-18>/<10>[.<0-
254>]
Configures the tengigabitethernet as the backup proxy interface