Arris C4C - Configure Snmp-Server Trap-Source Gigabitethernet

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2553
configure snmp-server trap-source gigabitethernet
Purpose
Configures a gigabitethernet interface as a trap source.
Default Access Level
15
Command Syntax
configure snmp-server trap-source gigabitethernet <slot/port>
configure snmp-server trap-source gigabitethernet [<slot>/<port] no
Supplemental
Information
To remove, use the no option.
Parameters
<slot>/port>
RCM slot number/gigabitEthernet port number.
Valid range for the C4 CMTS is <17-18>/<0-9>
Valid range for the C4c CMTS is <17>/<0-9>