Arris C4C - Configure Interface Gigabitethernet Isis Lsp-Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1822
configure interface gigabitethernet * isis lsp-interval
Purpose
Configures the time delay between successive LSPs for the specified interface.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis lsp-interval <milliseconds>
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis lsp-interval no
Supplemental
Information
To restore the default value, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<milliseconds>
Milliseconds between successive LSPs. Valid range is 1 to 65535.