Arris C4C - Configure Interface Link-Aggregate Ipv6 Nd Prefix at

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1897
configure interface link-aggregate * ipv6 nd prefix * at
Purpose
Sets the lifetime and advertisements for prefix along with the date and time the prefix expires on the specified interface.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> ipv6 nd prefix <word> at <valid_date> <preferred_date>
[off-link] [no-autoconfig] [autoconfig]
configure interface link-aggregate <0-9[.0-254]> ipv6 nd prefix <word> at <valid_date> <preferred_date>
[off-link] [no-autoconfig] [autoconfig] no
Supplemental
Information
To restore the default setting, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<word>
IPv6 address
[off-link]
Indicates prefix is not locally reachable by hosts and must be routed.
[no-autoconfig]
Indicates that the host may not use prefix for auto-configured IPv6 addresses.
<valid_date>
Valid date in year:month:day:hour:minute:second
[<preferred_date>]
Preferred date in the format: year:month:day:hour:minute:second
[off-link]
Indicates prefix is not locally reachable by hosts and must be routed.
[no-autoconfig]
Indicates that the host may not use prefix for auto-configured IPv6 addresses.
[autoconfig]
Indicates that the host may use prefix for auto-configured IPv5 addresses.