Arris C4C - Interface Cable-Mac;Cable Upstream-Bonding-Group;Cable-Upstream

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1583
configure interface cable-mac * cable upstream-bonding-group * cable-upstream
Purpose
Defines the upstream channels to be used in the bonding group.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac> cable upstream-bonding-group <int> cable-upstream <slot/port>
configure interface cable-mac <mac> cable upstream-bonding-group <int> cable-upstream <slot/port> no
Supplemental
Information
All the channels must be within one MAC domain.
Note: Multiple upstreams can configured using a range of upstreams.
To remove the channel from the bonding group channel set, use the no option.
Parameters
<mac>
The MAC identifier. Valid numbers are 0-415.
<int>
Static bonding group identifier
<slot>/<port>
The chassis slot in which the CAM resides and upstream port number.
Related Commands
show cable bonding-group-status (page 2637)