Chapter 14: Cable-side Configuration
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 424
Cable mDSsg/
Fiber Node MAC mCMsg mUSsg Channels
---------------- ----- ----- ------ ---------------------------------------
FN1 1 1 U1 13/0-3
FN1 1 1 D1 1/4-7
FN2 2 1 D1 12/0-3
FN2 2 1 U1 1/8-11
FN3 3 1 D1 1/0-3
FN3 3 1 U1 2/0-3
FN4 4 1 D1 10/0-3
FN4 4 1 U1 2/4-7
FN5 5 1 D1 9/0-3
FN5 5 1 U1 2/8-11
* Indicates that downstream channel is not primary-capable.
Display Specific MD-DS-SG Fiber Nodes
The following command example displays detailed information regarding specific MAC domain downstream signaling
group fiber nodes and their associated service groups and ports:
show cable fiber-node mDSsg 1
An output similar to the following example will occur:
Cable mDSsg/
Fiber Node MAC mCMsg mUSsg Channels
---------------- ----- ----- ------ ----------------------------------------
FN1 1 1 U1 13/0-3
FN1 1 1 D1 1/4-7
FN2 2 1 D1 12/0-3
FN2 2 1 U1 1/8-11
FN3 3 1 D1 11/0-3
FN3 3 1 U1 2/0-3
FN4 4 1 D1 10/0-3
FN4 4 1 U1 2/4-7
FN5 5 1 D1 9/0-3
FN5 5 1 U1 2/8-11
FN6 6 1 D1 8/0-3
FN6 6 1 U1 4/0-3
* Indicates that downstream channel is not primary-capable.
To Next Page
Loading...
