Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2510
configure router rip * distribute-list * in
Purpose
Configures filtering for inbound RIP routes.
Default Access Level
15
Command Syntax
configure router rip [vrf default] distribute-list <access_list_number> in {cable-mac <mac> |
gigabitethernet <slot/port> | link-aggregate <0-9[.0-254]> | tengigabitethernet <slot/port>}
configure router rip [vrf default] distribute-list <access_list_number> in {cable-mac <mac> |
gigabitethernet <slot/port> | link-aggregate <0-9[.0-254]> | tengigabitethernet <slot/port>} no
Supplemental
Information
To disable filtering, use the no option.
Parameters
[vrf default]
Name of the assigned VRF.
<access_list_
number>
Access list number (1-99)
cable-mac <mac>
The MAC identifier. Valid numbers are 0-415.
<slot>/port>
RCM slot number/gigabitEthernet port number.
Valid range for the C4 CMTS is <17-18>/<0-9>
Valid range for the C4c CMTS is <17>/<0-9>
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<slot>/port>
RCM slot number/gigabitEthernet port number.
Valid range for the C4 CMTS is <17-18>/<10>
Valid range for the C4c CMTS is <17>/<10>

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English