Arris C4C - Configure Cable Global Max-Ucd-Burst-Len

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1307
configure cable global max-ucd-burst-len
Purpose
Configures the maximum UCD concatenation burst size. The C4 CMTS limits the burst-len parameter within each upstream's UCD
message for the Long Data Grant IUC(s) in terms of minislots using this new parameter. This limits the maximum bandwidth request
size that a modem is permitted to request.
Default Access Level
15
Command Syntax
configure cable global max-ucd-burst-len <2048-16128>
Supplemental
Information
Note: Each modem is still constrained by its configuration file parameters. A DOCSIS 1.0 configuration is constrained by maximum
transmit burst; A DOCSIS 1.1 configuration is constrained by maximum concatenation burst and maximum transmit burst.
Parameters
<2048-16128>
Maximum UCD concatenation burst size in bytes. Default value is set at 16128.