Arris C4C - Configure Route-Map-Policy Permit

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2312
configure route-map-policy * permit
Purpose
Configures conditions that permit the route.
Default Access Level
15
Command Syntax
configure route-map-policy <name> permit [<int>]
configure route-map-policy <name> permit [<int>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<name>
Name of this route-map
[<int>]
Sequence number