Arris C4C - Configure Interface Gigabitethernet Ip Ospf Cost

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1755
configure interface gigabitethernet * ip ospf cost
Purpose
Specifies the cost of sending a packet on an interface.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip ospf cost <metric>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip ospf cost [<metric>] no
Supplemental
Information
To disable OSPF authentication cost, use the no option.
Parameters
<slot></port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<metric>
Link state metric with value range from 0 to 65535