Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1475
configure interface cable-downstream * cable dsg tunnel-group
Purpose
Configures and associates a tunnel group with the downstream on a specified interface.
Default Access Level
15
Command Syntax
configure interface cable-downstream <slot/port> cable dsg tunnel-group <0-4294967295> [index <0-
4294967295>] [priority <priority>] [vsp-list <vendorsetid>]
configure interface cable-downstream <slot/port> cable dsg tunnel-group <0-4294967295> [index <0-
4294967295>] [priority <priority>] [vsp-list <vendorsetid>] no
Supplemental
Information
Configures and associates a tunnel group with the downstream on a specified interface.
Parameters
<slot>
The chassis slot in which the targeted downstream Cable Access Module resides. Valid range for the C4 CMTS is 0-15; valid range for
the C4c CMTS is 10-15.
<port>
The downstream port.
<0-4294967295>
Identifier of the tunnel group to associate
[index <0-
4294967295>]
The channel index associated with the tunnel group. Valid range is 0-4294967295.
[priority <priority>]
The priority of this rule.
[vsp-list
<vendorsetid>]
Identifier of the vendor set to be associated with the tunnel group on this downstream interface.

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English