Arris C4C - Configure Cable Load-Balance Include CM-Mac

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1342
configure cable load-balance include cm-mac
Purpose
Configures one or a group of CMs into a restricted load balancing group using MAC addresses.
Default Access Level
15
Command Syntax
configure cable load-balance include cm-mac <addr> [mac-mask <word>] [group <1-8388607>] [service-type
<word>]
configure cable load-balance include cm-mac <addr> [mac-mask <word>] [group <1-8388607>] [service-type
<word>] no
Supplemental
Information
To return to the default value, use the no option.
Parameters
<addr>
CM MAC address (1-6 bytes long)
[mac-mask <word>]
CM MAC address (1-6 bytes long)
[group <1-
8388607>]
Restricted load-balance group ID
[service-type
<word>]
Sets service type ID for CMs