Arris C4C - Configure Snmp-Server Community

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2535
configure snmp-server community
Purpose
The SNMP server community string command sets a community string for SNMP access to the C4 CMTS.
Default Access Level
15
Command Syntax
configure snmp-server community <community name string> [index <community-index> [ttag <transport-tag>]
<ro | rw> [security <name>]
configure snmp-server community <community name string> [index <community-index> [ttag <transport-tag>]
<ro | rw> [security <name>] no
Supplemental
Information
SNMP management stations that want access to the C4 CMTS must supply a community string that is set on the switch.
To remove the SNMP community string of "public", use the no option.
Parameters
<community name
string>
Character string for the community string
[index <community-
index>]
The index of the SNMP Community Table
[tag <transport-
tag>]
The transport tag associated with the SNMP community entry.
<ro | rw>
Specify whether access is read-only or read-write.
[security <name>]
The View-based Access Control Module (VACM) security name.