Arris C4C - Show Ipv6 Ospf Database External

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2908
show ipv6 ospf * database external
Purpose
Displays the IPv6 OSPF database information filtered by external link states.
Default Access Level
1
Command Syntax
show ipv6 ospf [vrf <name>] database external {<0-4294967295 | X:X:X:X::X/<0-128>) adv-router <A.B.C.D>
Supplemental
Information
N/A
Parameters
[vrf <name>]
Name given to VRF. To display only the default VRF, enter "default" as the VRF name.
<0-4294967295>
Link state ID
X:X:X:X::X/<0-128>
IPv6 prefix
<A.B.C.D>
Advertising Router (as an IP address)