Arris C4C - Configure Ipv6 Dhcp Relay Traffic-Class

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2101
configure ipv6 dhcp relay traffic-class
Purpose
Sets the specific value of the traffic class field in the IPv6 header that should be used by the DHCP Relay Agent when sending packets
to the DHCP server.
Default Access Level
15
Command Syntax
configure ipv6 dhcp relay traffic-class <0-252>
configure ipv6 dhcp relay traffic-class <0-252> no
Supplemental
Information
To remove the interface, use the no option.
Parameters
<0-252>
Value of the traffic class field in the IPv6 header.