Arris C4C - Show ARP;ND Requests; Show ARP;ND Replies

Chapter 32: Packet Throttling
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 938
FN40
Cable-Mac= 1, mCMsg = 1 mDSsg = 1 mUSsg = 1 RCP_ID= 0x0010000004 RCC_Stat= 1, RCS=0x01000002
TCS=0x01000003
Timing Offset=274 Rec Power= 0.00 dBmV Proto-Throttle=Normal dsPartialServMask=0x0000
usPartialServMask=0x000006
Uptime= 0 days 1:03:27 IPv4=13.0.1.0 cfg=RegReq349 noLoadBal=0x00
Privacy=Disabled
u/d SFID SID State Sched Tmin Tmax DFrms DBytes CRC HCS Slot/Ports
uB 1 1 Activ BE 0 30000000 0 0 0 4 13/0.0,(1.0),(2.0),3.0
dB 2 *1 Activ 0 100000000 38390 10442080 5/0,1,2,3
Current CPE=6 Max CPE=6
CPE 0013.0100.0001 IP=13.0.1.1 Filter-Group:Up=0 Down=0 Proto-Throttle=Normal
CPE 0013.0200.0001 IP=13.0.1.2 Filter-Group:Up=0 Down=0 Proto-Throttle=Normal
CPE 0013.0300.0001 IP=13.0.1.3 Filter-Group:Up=0 Down=0 Proto-Throttle=Normal
CPE 0013.0400.0001 IP=13.0.1.4 Filter-Group:Up=0 Down=0 Proto-Throttle=Normal
CPE 0013.0500.0001 IP=13.0.1.5 Filter-Group:Up=0 Down=0 Proto-Throttle=Normal
CPE 0013.0600.0001 IP=13.0.1.6 Filter-Group:Up=0 Down=0 Proto-Throttle=Normal
Show ARP/ND Requests
The following is an example of the output returned for ARP requests with no minimum set:
show cable proto-throttle arp-nd-requests-throttled
An example output such as follows is returned:
ARP throttling is: on
max-burst: 10
interval: 5
Arp-ND-Replies
Interface Type Throttled-mac CM-mac Throttled
---------------------------------------------------------------------------------
cable-mac 1 (12/0/0-3/2/0) CPE 0000.054f.aec8 0015.cf04.c4a7 50
cable-mac 1 (12/0/0-3/2/0) CPE 0000.054f.aec9 0015.cf04.c4a8 100
cable-mac 1 (12/0/0-3/2/0) CPE 0000.054f.aeca 0015.cf04.c4a9 25
Show ARP/ND Replies
The following is an example of output to the show ARP replies command, with the minimum set to 30:
show cable proto-throttle arp-nd-replies-throttled 30
An example output such as follows is returned: