Arris C4C - Configure Interface Gigabitethernet Link-Aggregate

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1831
configure interface gigabitethernet * link-aggregate
Purpose
Configures Link Aggregation bundling.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot/port> link-aggregate <0-9[.0-254]>
configure interface gigabitethernet <slot/port> link-aggregate [<0-9[.0-254]>] no
Supplemental
Information
This applies when a system has IPv4 and IPv6 configuration.
To restore the default value, use the no option.
Parameters
<slot>/port>
RCM slot number/gigabitEthernet port number.
Valid range for the C4 CMTS is <17-18>/<0-9>
Valid range for the C4c CMTS is <17>/<0-9>
<0-9[.0-254]>
LAG identifier <lag[sub interface]>