Arris C4C - Configure Interface Cable-Mac;Cable Freq-Ds-Max

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1528
configure interface cable-mac * cable freq-ds-max
Purpose
Allows overriding the Global settings by provisioning the maximum downstream frequency limit on a cable-mac interface.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac> cable freq-ds-max {858|867|999}
configure interface cable-mac <mac> cable freq-ds-max [{858|867|999}] no
Supplemental
Information
To remove the override, use the no option.
Parameters
<mac>
The MAC identifier. Valid numbers are 0-415.
{858|867|999}
The maximum DS frequency limit for the cable-mac interface.