Arris C4C - Configure Interface Gigabitethernet Ip Igmp Proxy-Interface

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1746
configure interface gigabitethernet * ip igmp proxy-interface
Purpose
Sets the proxy interface (must be an RCM interface).
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp proxy-interface <gigabitethernet
<17-18>/<09>[.<0-254>]> | link-aggregate <0-9[.0-254]> | tengigabitethernet <17-18>/<10>[.<0-254>]>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp proxy-interface <gigabitethernet
<17-18>/<09>[.<0-254>]> | link-aggregate <0-9[.0-254]> | tengigabitethernet <17-18>/<10>[.<0-254>]> no
Supplemental
Information
To remove the proxy-interface, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
gigabitethernet <17-
18>/<0-9>[.<0-254>]
Configures the gigabitethernet as the proxy interface
link-aggregate <0-9[.0-
254]>
Configures the link-aggregate as the proxy interface
tengigabitethernet
<17-18>/<10>[.<0-
254>]
Configures the tengigabitethernet as the proxy interface