Chapter 7: Router Control Module (RCM)
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 218
3. Grip the sides of the SFP with your thumb and forefinger and insert the copper SFP into the selected RCM port and
push firmly into the port until it seats.
4. Lock the SFP into place by closing the latch in the up or locked position. The latch is properly closed when access to the
connector is not obstructed.
5. Insert the copper Ethernet connector until it clicks in place.
To Next Page
Loading...
