To Next Page

To Previous Page

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide

Destination IP address (in the form A.B.C.D.) of the source ping packet

[source <ip addr>]

Source IP address of the ping packet.

[repeat-count <int>]

Number of packets to send. Maximum value for repeat count is 32768. Default is 5.

[timeout <int>]

Specifies the timeout in seconds that the ECHO REPLY response should be received in response to the ECHO REQUEST. Range

is 1 to 255. Default is 2.

[size <int>]

Specifies the datagram size in bytes. The range is 100 to 1480. Default is 100.

[tos <int>]

Specifies the type-of-service in the IP header of each ECHO REQUEST packet. Range is 0 to 255. Default is 0.

[ttl <int>]

Time-to-Live for the packet. Range is 1 to 255. Default is 64

[payload <payload pattern>]

ICMP payload pattern in hex (e.g. ab, a9, 99)

[dont-fragment]

Specify the don’t fragment bit is set

[mgmt]

Use out-of-band interface.

[validate]

Verify received packet matches sent

Arris C4C User Manual

Questions and Answers: