Arris C4C - Page 2654

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2654
lchan
Filter on logical channel number.
max-ftime <min>
Filter on maximum latest flap time (in minutes). Valid range is 0-100000.
max-lines <int>
The maximum number of CMs to display. Valid range is 0-10000
min-error <int>
Filter on minimum combined CRC and HCS error count
min-fcount <0-10000>
Filter on minimum flap count
non-operational
Filter on non-operational CMs
offline
Filter on offline CMs
operational
Filter on operational CMs
registered
Filter on registered CMs
slot <INTEGER>
Filters on CAM slot
sort-flap
Sort CMs by decreasing flap count
sort-time
Sort CMs by increasing latest flap time
state <state>
Cable modem state. Valid states are:
offline — Cable modem is not currently active
ranging — Initial ranging in progress
rngaborted — Ranging has failed
ranged — Ranging has completed
dhcpv4done — IP address has been assigned
registered — The modem is active and ready for traffic
denied — Service is being denied
operational — Active cable modem
regbpiinit — BPI registration has been completed
eaestart — CMTS has received an Auth Info message for EAE from the CM
dhcpv4start — CMTS has received a DHCPv4 DISCOVER message from the CM
dhcpv6start — CMTS has received a DHCPv6 Solicit message from the CM
dhcpv6done — CMTS has sent a DHCPv6 Reply message to the CM
tftpstart — Config file download has started
tftpdone — Config file download process has been completed
registering — CMTS has received a Registration Request from the CM
frwddisable — Registration complete, but forwarding prohibited.
rfmuteall — Mute all channels
non-operational — Any state other than operational
online-d — The modem has registered but network access is denied
unregistered
Filter on all but registered CMs