Arris C4C - Page 2882

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2882
Parameters
<vrf name>
Name given to VRF. To display only the default VRF, enter "default" as the VRF name.
[detail]
Shows active and inactive routes. Defaults to displaying only active routes.
[A.B.C.D[/mask]]
IP address or network with optional mask bits
[bgp]
Border Gateway Protocol
[connected]
Connected VRFs
[local]
Local routes
[include-inactive]
Shows active and inactive routes; defaults to displaying only active routes.
[longer-prefixes]
Displays the specified route and more specific routes.
[netmgmt]
Net management routes
[isis]
Intermediate System to Intermediate System (IS-IS)
[ospf]
Open Shortest Path First (OSPF) routes
[rip]
Routing Information Protocol (RIP) routes
[static]
Static routes