EasyManua.ls Logo

Arris C4C - Page 486

Arris C4C
3180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 16: Dynamic Routing Protocols
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 486
To display the IS-IS neighbor detail output which includes both the remote router’s protocol (M-ISIS or IS-IS) and the
remote router’s topologies (IPv4 and IPv6), use the following command:
show isis neighbor detail
The system output would look similar to the following:
System ID Interface SNPA State Hold Type Type Circuit Id Protocol
-------------- --------------------- ------------- ----- ---- ---- ---- ---------------- ---------
0100.8500.9001 gigabitEthernet 17/9 000b.45b6.0100 Up 9 L1/2 L1 TR11.01 M-ISIS
Area Address(es): 47.0001
IP Address(es): 10.60.0.1
IPv6 Address(es): fe80::215:15ff:fe15:1177
Uptime: 0 days 00:49:52
Priority: 64
Support restart signalling: Yes
Restart state: Not Restarting
Adjacency suppressed: N
Topology: IPv4, IPv6
Note: If the only "IS-IS" is displayed in the Protocol column above, this command will not display the Topology.
Using the command show isis database detail <word> (where <word> in this example is the LSP PDU identifier
"TR11.00-06") to display the IS-IS database detail, including the MT extensions, use the following command:
show isis database detail TR11.00-06
The system output would look similar to the following:
IS-IS Level-2 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
-------------------- ----------- ------------ ------------ --------
TR11.00-06 0x000001BF 0xF0E8 602 0/0/0
Metric: 0 IPv6 (MT-IPv6) 2001:1111:2222:3333:/64
Metric: 0 IPv6 (MT-IPv6) 2001:1234:0:3:/64
Metric: 0 IPv6 (MT-IPv6) 2001:1234:0:4:/64
Metric: 10 IPv6 (MT-IPv6) 2002:2001:3001:3002:/64
To display the IPv4 IS-IS route information, use the following command:
show ip route isis
The system output would look similar to the following:
Codes: (L1) internal level-1, (L2) internal level-2, (eL1) external level-1, (eL2) external level-2
(S) summary, (IA) internal area, (E1) external type-1, (E2) external type-2
(I) internal, (E) external

Table of Contents

Related product manuals