Chapter 16: Dynamic Routing Protocols
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 557
show route-map-policy
Sample output:
Route-map routemap1, permit, sequence 10
Match clauses:
ip address (access-lists): 20
Set clauses:
ip next-hop 10.69.1.1
ip backup-next-hop 10.69.2.1
Policy routing matches: 0 packets, 0 bytes
Policy routing failed : 0 packets, 0 bytes
permit, sequence 20
Match clauses:
ip address (access-lists): 30
Set clauses:
ip next-hop 10.69.3.1
ip backup-next-hop 10.69.4.1
ip tos normal
Policy routing matches: 0 packets, 0 bytes
Policy routing failed : 0 packets, 0 bytes
permit, sequence 30
Match clauses:
Set clauses:
ip interface null
Policy routing matches: 0 packets, 0 bytes
Policy routing failed : 0 packets, 0 bytes
Route-map routemap2, permit, sequence 20
Match clauses:
ip address (access-lists): 40
Set clauses:
ip next-hop 10.69.5.1
Policy routing matches: 0 packets, 0 bytes
Policy routing failed : 0 packets, 0 bytes
show access-list
Sample output:
Extended IP access list 155
10 permit ip any 11.0.0.0 0.255.255.255 precedence routine (0 matches)
20 permit ip any 14.0.0.0 0.255.255.255 precedence routine (0 matches)
show ip policy
Sample output:
Interface Route map
--------------------------------------- ---------
To Next Page
Loading...
