Chapter 17: IP Packet Filters, Subscriber Management
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 584
The following show command can be used to determine whether Upstream Drop Classifier operation is enabled or
disabled:
show interface cable-mac 1 detail | include Upstream Drop Classifiers
The following is an example of the output:
Upstream Drop Classifiers: disabled
The following show command example can also be used to view the status:
show running-config verbose | include upstream-drop-classifiers enable
An output similar to the following example occurs:
configure interface cable-mac 1 cable upstream-drop-classifiers enable
configure interface cable-mac 2 cable upstream-drop-classifiers enable
configure interface cable-mac 3 cable upstream-drop-classifiers enable
configure interface cable-mac 4 cable upstream-drop-classifiers enable
To Next Page
Loading...
