Arris C4C - Page 775

Chapter 24: IP Video
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 775
Purpose
CLI Command
Set multicast Group Configuration PIM-SM or
ASM and source IP ranges
configure cable multicast qos group <int> [group-qos <int>]
session-range <ip_addr> source <ip_addr>
Set type of service on the multicast Group
Configuration
configure cable multicast qos group <int> [group-qos <int>]
Set IP Video attribute(s)
configure ip-video attribute-encoding <hex> [no]
Configure the global Rendezvous Point (RP) IP
address for ASM operations.
configure ip pim rp-address <rp-address>
Display IP Video attributes
show ip-video global
Display multicast GQC
show cable multicast group-qos
Display multicast QoS Group Configurations
show cable multicast qos group
Display current per-channel counts
show interface cable-downstream <word> cable ip-video
[{drops|multicast|unicast|all}]
Display channel counts in histogram format
show interface cable-downstream <word> cable ip-video
histogram {dropped-pkt|dropped-multicast|dropped-
unicast|multicast-pkt|multicast-flows|unicast-pkt|unicast-
flows} [granularity <int>] [scale <int>]
Display summary of per-channel counts results
show interface cable-downstream <word> cable ip-video
summary
Display the RP address including multicast group
and prefix
show ip pim rp mapping