Arris C4C - Page 969

Chapter 34: Internet Protocol Detail Record
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 969
configure cable metering [enable|disable]
configure cable metering mode <docsis20|docsis30>
configure cable metering [query-port <port>] [streaming-port <port>]
configure cable metering [keep-alive-interval <1...600>]
configure cable metering collector <priority> <ip-address> [no]
show cable metering
DOCSIS 2.0 Mode Commands — DOCSIS 2.0 mode commands are listed as follows:
configure cable metering [data-ack-window <1...65535>] [data-ack-timeout <1...600>]
configure cable metering session-id <integer>
configure cable metering export [all-counts] [cpe-info] [no]
configure cable metering report-cycle start <hh:mm|random> interval <15-1440> [no]
DOCSIS 3.0 Mode Commands — DOCSIS 3.0 mode commands are listed as follows:
configure cable metering report-cycle set <1-255> start <hh:mm|random> interval <15-1440> [no]
configure cable metering session id <1-255> service <samis-1|cpe> method <time|event|adhoc>
[data-ack-window <1...65535>] [data-ack-timeout <1...600>] [report-cycle-set <1...255>] [all-counts]
[no]
show cable metering [detail]