© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1210
If the protocol value is TCP, the CMTS supports the additional optional parameter string [operator [port]] after both the source
and source-wildcard options, and the additional optional parameter [established]. This function compares source or destination
ports. Possible source operators can be: lt (less than) gt (greater than), eq (equal), neq (not equal), range (inclusive range).
If the operator is positioned after the source and source-wildcard, it must match the source port. If the operator is positioned after
the destination and destination-wildcard, it must match the destination port. The range operator requires two port numbers; all
other operators require one port number.
Match packets with given DSCP value. Valid values are:
<0-63> Differentiated services codepoint values
af11 Match packets with AF11 dscp (001010)
af12 Match packets with AF12 dscp (001100)
af13 Match packets with AF13 dscp (001110)
af21 Match packets with AF21 dscp (010010)
af22 Match packets with AF22 dscp (010100)
af23 Match packets with AF23 dscp (010110)
af31 Match packets with AF31 dscp (011010)
af32 Match packets with AF32 dscp (011100)
af33 Match packets with AF33 dscp (011110)
af41 Match packets with AF41 dscp (100010)
af42 Match packets with AF42 dscp (100100)
af43 Match packets with AF43 dscp (100110)
cs1 Match packets with CS1(precedence 1) dscp (001000)
cs2 Match packets with CS2(precedence 2) dscp (010000)
cs3 Match packets with CS3(precedence 3) dscp (011000)
cs4 Match packets with CS4(precedence 4) dscp (100000)
cs5 Match packets with CS5(precedence 5) dscp (101000)
cs6 Match packets with CS6(precedence 6) dscp (110000)
cs7 Match packets with CS7(precedence 7) dscp (111000)
default Match packets with default dscp (000000)
ef Match packets with EF dscp (101110)