RM0046 System Status and Configuration Module (SSCM)
Doc ID 16912 Rev 5 247/936
10.3 Functional description
The primary purpose of the SSCM is to provide information about the current state and
configuration of the system that may be useful for configuring application software and for
debug of the system.
10.4 Initialization/application information
10.4.1 Reset
The reset state of each individual bit is shown in Section 10.2.2, “Register description.
Table 88. PWCMPH/L allowed register accesses
Access type
Access width
8-bit 16-bit 32-bit
(1)
Read Allowed Allowed Allowed
Write Not allowed Not allowed Allowed
1. All 32-bit accesses must be aligned to 32-bit addresses (i.e., 0x0, 0x4, 0x8 or 0xC).
To Next Page
Loading...
