RM0046 Preface
Doc ID 16912 Rev 5 45/936
Preface
Overview
The primary objective of this document is to define the functionality of the SPC560P40/34
family of microcontrollers for use by software and hardware developers. The SPC560P40/34
family is built on Power Architecture
®
technology and integrates technologies that are
important for today’s electrical hydraulic power steering (EHPS), electric power steering
(EPS), airbag applications, anti-lock braking systems (ABS), and motor control applications.
As with any technical documentation, it is the reader’s responsibility to be sure he or she is
using the most recent version of the documentation.
To locate any published errata or updates for this document, visit the ST Web site at
www.st.com.
Audience
This manual is intended for system software and hardware developers and applications
programmers who want to develop products with the SPC560P40/34 device. It is assumed
that the reader understands operating systems, microprocessor system design, basic
principles of software and hardware, and basic details of the Power Architecture.
Chapter organization and device-specific information
This document includes chapters that describe:
● The device as a whole
● The functionality of the individual modules on the device
In the latter, any device-specific information is presented in the section “Information Specific
to This Device” at the beginning of the chapter.
References
In addition to this reference manual, the following documents provide additional information
on the operation of the SPC560P40/34:
● IEEE-ISTO 5001™ - 2003 and 2010, The Nexus 5001™ Forum Standard for a Global
Embedded Processor Debug Interface
● IEEE 1149.1-2001 standard - IEEE Standard Test Access Port and Boundary-Scan
Architecture
To Next Page
Loading...
