IP Configuration Command Set
Configuring PIM
12-56 Matrix DFE-Platinum and Diamond Series Configuration Guide
12.2.7.6 show ip pim bsr
Use this command to display BootStrap Router (BSR) information.
show ip pim bsr
Syntax Description
None.
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router1#
Command Defaults
None.
Example
This example shows how to display BootStrap Router (BSR) information:
Table 12-4 provides an explanation of the command output.
Matrix>Router1#show ip pim bsr
PIMv2 Elected Bootstrap Router Information:
BSR Address: 10.0.0.1
Bsr Priority: 77
Bsr Hash Mask Length: 30
Bsr Uptime: 00:01:10
Bsr Expiry: 00:00:49
This Router is a Candidate Bootstrap Router (CBSR)
Candidate BSR Address: 10.0.0.1
Hash Mask Length: 30
Priority: 77
Table 12-4 show ip pim bsr Output Details
Output What It Displays...
BSR Address IP address of the bootstrap router.
BSR Priority Priority as set by the ip pim bsr-candidate command.
To Next Page
Loading...
Need help?
General