Enterasys Matrix 2G4072-52 - Clear Forcelinkdown

Port Configuration Command Set
Disabling / Enabling and Naming Ports
Matrix DFE-Platinum and Diamond Series Configuration Guide 4-41
4.3.3.7 clear forcelinkdown
Use this command to resets the force link down function to the default state of disabled.
clear forcelinkdown
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the force link down function to disabled:
Matrix(rw)->clear forcelinkdown