Enterasys Matrix 2G4072-52 - Clear Spantree Portenable

Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
Matrix DFE-Platinum and Diamond Series Configuration Guide 6-95
6.2.2.3 clear spantree portenable
Use this command to reset the default value for one or more Spanning Tree ports to enabled.
clear spantree portenable port-string
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the default Spanning Tree port status value to enabled on fe.1.12:
port-string Specifies port(s) to reset. For a detailed description of
possible port-string values, refer to Section 4.1.1.
Matrix(rw)->clear spantree portenable fe.1.12