Spanning Tree Configuration Command Set
Configuring Spanning Tree Port Parameters
6-114 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.2.22 show spantree operedge
Use this command to display the Spanning Tree edge port operating status for a port.
show spantree operedge [port port-string]
Syntax Description
Command Defaults
If port-string is not specified edge port operating status will be displayed for all
Spanning Tree ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the edge port status for fe.2.7:
port port-string (Optional) Displays edge port operating status for
specific port(s). For a detailed description of possible
port-string values, refer to Section 4.1.1
.
Matrix(rw)->show spantree operedge port fe.2.7
Port fe.2.7 has a Port Oper Edge of Edge-Port
To Next Page
Loading...
