Logging And Network Management Command Set
Configuring RMON
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-93
11.2.4.33 show rmon capture
Use this command to display RMON capture entries and associated buffer control entries.
show rmon capture [index] [nodata]
Syntax Description
Command Defaults
If no options are specified, all buffer control entries and associated captured
packets will be displayed.
Command Type
Switch command.
Command Mode
Read-Only.
index (Optional) Displays the specified buffer control entry and
all captured packets associated with that entry.
nodata (Optional) Displays only the buffer control entry specified
by index.
To Next Page
Loading...
