General Configuration Command Set
Setting Basic Device Properties
Matrix DFE-Platinum and Diamond Series Configuration Guide 2-47
2.2.3.4 show ip gratuitous-arp
Use this command to display the gratuitous ARP processing behavior.
show ip gratuitous-arp
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the IP gratuitous-arp process
for both requests and replies.
Matrix(rw)->show ip gratuitous-arp
Processing gratuitous ARP requests and replies.
To Next Page
Loading...
