Security Configuration Command Set
Configuring TACACS+
14-34 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.4.8 clear tacacs session
Use this command to return the TACACS+ session authorization settings to their default values.
clear tacacs session authorization { [service] [read-only] [read-write]
[super-user] }
Syntax Description
Command Defaults
At least one of the session authorization parameters must be specified.
Command Type
Switch command.
Command Mode
Read-Write.
Examples
This example shows how to return only the service name to the default of “exec.”
This example shows how to return all the session authorization parameters to their default values.
authorization Clears the TACACS+ session authorization parameters.
service Clears the TACACS+ session authorization service name to
the default value of “exec.”
read-only Clears the TACACS+ session authorization read-only
attribute-value pair to their default values of “priv-lvl” and
0.
read-write Clears the TACACS+ session authorization read-write
attribute-value pair to their default values of “priv-lvl” and
1.
super-user Clears the TACACS+ session authorization super-user
attribute-value pair to their default values of “priv-lvl” and
15.
Matrix(rw)->clear tacacs session authorization service
Matrix(rw)->clear tacacs session authorization service read-only
read-write super-user
To Next Page
Loading...
Need help?
General