Logging And Network Management Command Set
Configuring System Logging
Matrix DFE-Platinum and Diamond Series Configuration Guide 11-9
11.2.1.4 clear logging server
Use this command to remove a server from the Syslog server table.
clear logging server index
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This command shows how to remove the Syslog server with index 1 from the server table:
index Specifies the server table index number for the server to
be removed. Valid values are 1 - 8.
Matrix(rw)->clear logging server 1
To Next Page
Loading...
