Enterasys Matrix 2G4072-52 - Show Ip Slb Sticky

IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
12-106 Matrix DFE-Platinum and Diamond Series Configuration Guide
12.2.8.23 show ip slb sticky
Use this command to display server load balancing active sticky connections.
show ip slb sticky [client ip-address]
Syntax Description
Command Type
Router command.
Command Mode
Any router mode.
Command Defaults
If client is not specified, all server load balancing active sticky connections are
displayed.
Examples
This example shows how to display all server load balancing active sticky connections.
client ip-address (Optional) Display sticky connections for a particular client.
Matrix>Router1#show ip slb sticky
client-ip real-server-ip conns ftp-cntrl
------------------------------------------------------------------------
192.170.1.253 192.169.1.11 * 2
192.168.1.90 192.169.2.14 * 0