Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Matrix DFE-Platinum and Diamond Series Configuration Guide 14-77
14.3.6.21 show pwa session
Use this command to display information about current PWA sessions.
show pwa session [port-string]
Syntax Description
Command Type
Switch command.
Command Defaults
If port-string is not specified, session information for all ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display PWA session information:
port-string (Optional) Displays PWA session information for
specific port(s). For a detailed description of possible
port-string values, refer to Section 4.1.1.
Matrix(rw)->show pwa session
Port MAC IP User Duration Status
-------- ----------------- --------------- ------------- ------------ ---------
ge.2.19 00-c0-4f-20-05-4b 172.50.15.121 pwachap10 0,14:46:55 active
ge.2.19 00-c0-4f-24-51-70 172.50.15.120 pwachap1 0,15:43:30 active
ge.2.19 00-00-f8-78-9c-a7 172.50.15.61 pwachap11 0,14:47:58 active
To Next Page
Loading...
