Enterasys Matrix 2G4072-52 - Clear Spantree Tctrapsuppress

Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
6-60 Matrix DFE-Platinum and Diamond Series Configuration Guide
6.2.1.47 clear spantree tctrapsuppress
Use this command to clear topology change trap suppression settings.
clear spantree tctrapsuppress
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to clear topology change trap suppression settings:
Matrix(rw)->clear spantree tctrapsuppress