Security Configuration Command Set
Configuring Flow Setup Throttling (FST)
14-202 Matrix DFE-Platinum and Diamond Series Configuration Guide
14.3.15.9 clear flowlimit port class
Use this command to remove flow limiting port classification properties.
clear flowlimit port class [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If port-string is not specified, classifications will be removed from all ports.
Example
This example shows how to clear port classifications from all Gigabit Ethernet ports:
port-string (Optional) Specifies port(s) on which to remove flow
limiting classification properties.
Matrix(rw)->clear flowlimit port class ge.*.*
To Next Page
Loading...
Need help?
General